send an email to


6-color LED source with Ø 175 mm Fresnel lens

14.1° - 45.2° linear zoom

high luminosity with an evenly diffused and flat beam

superior white light quality
and accurate color rendering

extended color palette

wide gamut of pastel-like colors

linear CTC to meet camera
or production requests

Silent mode for theatres and TV studios

'Hi-Q Dimming' technology

Green – Magenta linear balance,
for a natural reproduction of any skin tone

Technical data

ALCHEMY 3 is a very compact high performance Fresnel LED wash moving head made for medium to small theatres and television studios. The unit is able to deliver an outstanding light quality coupled with a high luminosity.
ALCHEMY 3 bears the ‘HQS’ (High quality Spectrum) mark which identifies the ability to generate a superior white light and a broad color gamut with pastel shades and rich warm nuances. Also ALCHEMY 3’ ‘Silent’ mode matches theatre and television standards, where quietness is a key factor.

• Multi-chip LED source
• 6,600 Lumen output
• CRI: up to 98
• TLCI: up to 96
• LED lifespan: 20,000 hours (70% lumen output)

• 14.1°- 45.2° linear zoom
• Ø 175 mm Fresnel lens
• Beam shaper (2x1 ratio) with endless rotation; indexable
• Heavy frost filter insertable via DMX
• Retractable ‘top hat’

Linear CCT (1800 K - 10000 K)
Green saturation: Linearly adjustable green/magenta point
• 100 gel filters emulation
- Linear balance from gel filters emulation to white
- Linear balance between gel filters emulation
- Gel filters’ color response fully adapts to different CCT values
• Color mixing by 6-color ‘Advanced’ mode
Extra deep colors: Two DMX-selectable filters (‘deeper blue’ and ‘deep red’) allow to further extend the range of reproducible colors toward the two ends of the visible spectrum
HQS (High Quality Spectrum) - DTS’ trademark certifies a product’ superior white light quality and its ability to generate an extended color palette offering a wider gamut of pastel shades with rich warm nuances.

‘Hi-Q Dimming’ technology – guarantees a perfect linearity in the increase / attenuation of brightness of multi-chip LED sources, even at low dimming levels, without visible ‘steps’ between adjacent values
Tungsten emulation - CCT variation emulates behavior of Halo-lamps

• LCD graphic display + 4 soft-keys; Auto-flip; Key-Lock function
• RDM / DMX 512 protocol
• Wireless DMX available on request
• Art-Net 4, sACN protocols available on request
• ‘Standard’ and ‘Silent’ operation modes
• Internal operating system updatable via DTS dongle firmware uploader
• Li-Fe backup battery for controlling the display settings even when the unit is not powered

• 4 DMX modes:
- 1. CCT (default)
- 2. Advanced
- 3. Basic
- 4. Expo
- 5. CMY Emulation

• Pan 540° (1.8 sec)
• Tilt 215° (1.1 sec)
• 16-bit resolution
• Pan / Tilt lock

• Electronic full-range 100-240Vac 50-60 Hz
• Power consumption: 300 W max
• Power Factor: PF >0.94

• Power supply: PowerCON TRUE1 In/Out panel connectors
• DMX: XLR 3-pole and 5-pole In/Out panel connectors

Overvoltage and overtemperature circuits protection

• IP20
• Weight: 15.5 Kg (34 lbs)
• Finishing: Black

• 1 x PowerCON TRUE1 female connector (code 0520P066)
• 1 x Omega bracket with “Fast Lock” (code 02K00467)

• Lumen Radio Wireless DMX TX-RX interface kit (code 03.LA.241)

• Art-Net 4, sACN interface Kit (code 03.LA.242)

• Aliscaf clamp for tube diameter 50 mm - Max load 200 Kg (code 0521A033)

• Professional Quick trigger clamp - Max load 100 Kg (code 0521A037)

• “C” Clamp G60 - Max load 50 Kg (code 0521A004)

• Safety cable 3 x 600 mm - Max load 60 Kg (code 0521A010)

• DTS Dongle firmware uploader (code 03.LA.206)




    the product can be customized on request and can be completed with these accessories to make it fit better to your needs


    code 0521A037


    code 03.LA.206

    Safety cable - 3 x 600 mm
    max. capacity load 30 Kg (66 lbs)

    cod. 0521A010


    cod. 02K00467

    MAX LOAD 200 KG (440 LBS)

    cod. 0521A033


    cod. 02K0012267.0015

    Ask for info

      Fields marked with * are compulsory.

      I consent to the processing of my data in accordance with our Privacy & Policy

      TOP Ask for info